Learn the Dos and Don'ts of Using the EMX WEL-200 Wireless Edge Link | All Security Equipment

In today's fast-paced world, we're always on the lookout for better, faster, and safer ways of doing things. Thanks to evolving technology, we no longer have to suffer from dangerous and outdated methods. An excellent example of this is the EMX WEL-200 - a cutting-edge, complete wireless edge link that could change the way we think about safety edge and operator control box connections.

Modernize Your Safety Solution with the WEL-200

The WEL-200 is an advanced wireless gate sensing tool that allows you to link a sensing edge with your door and gate operators. With this device, you don't need long or dangerous cords running across your workspace to stretch across and connect your safety edge control box. With this wireless solution, you can enjoy compliance with the UL325 monitoring standards.

EMX WEL-200 Wireless Edge Link Features

One of the fantastic features of the WEL-200 is that it can operate with up to 200 feet of line of sight between the transmitter and receiver. The receiver can also connect to up to four transmitters and has separate relay and pulse outputs for both open and close edge functionalities. Additionally, it comes with NEMA 4X enclosure, making it suitable for outdoor use. You don't need an external antenna because the receiver can be mounted outside of the operator.

Avoid This When Installing the EMX WEL-200


Many professionals use WEL-200 to operate their automated gates. However, getting the most out of this equipment requires some best practices. One crucial suggestion is to avoid mounting the receiver in a metal box because it can result in poor wireless connection. To ensure the best results, mount the receiver outside of the operator box or a few inches further away from it. Your gate's motion must also be considered while installing the receiver. Proper installation is crucial to ensure the best wireless signal path and optimal performance of your WEL-200.

Examples of good and bad installations are shown.

Another key suggestion is not to put the receiver next to other wireless equipment. The radio waves produced by other devices can interfere with the EMX WEL-200. You may have to consider moving or separating them to get the best out of your wireless edge link. Lastly, if you find that your receiver doesn't solve your safety edge problem, don't assume that it's not working. Instead, check the sensing edge and troubleshoot that portion of the setup.


The EMX WEL-200 Wireless Edge Link

The WEL-200 is undoubtedly a technological marvel that can revolutionize the way we see operators and safety edge cords. By eliminating the need for long cords, it enhances safety, reduces accidents, and guarantees compliance with industry standards. It's essential to keep in mind that proper installation is key to getting the most out of your WEL-200.

Don't hesitate to take advantage of this smart and innovative tool; if you have any question feel free to contact us – we would be more than happy to help!

Leave a comment

All comments are moderated before being published