Skip to content
The EMX WEL-200 is a wireless edge link that interfaces sensing edges with gates and doors, providing an efficient and reliable operation method that is more secure than any of its competitors. Let’s take a closer look at what makes the WEL-200 different than the other options on the market.
The WEL-200 or Wireless Edge Link
Traditional wired edge link options rely on unsightly wiring to connect their safety edges to operators, which must run along either the length of a gate or behind a door. This wiring can often be unreliable due to its exposure to weather elements or stress from constant use. The EMX WEL-200 eliminates this problem entirely with its wireless design. It works by connecting sensing edges with transmitters and their operators when pressed—triggering a programmed action such as garage door opening or barrier opening—all without any wires! Not only does this make for a much cleaner appearance, but it also greatly increases safety since there are no exposed wires that can be tampered with. Additionally, because the connection is wireless, it reduces installation time and costs compared to traditional wired systems.
Comprehensive Safety Edge Sensor Solution
Wireless options like the WEL-200 provide great advantages for safety edge link operations and are a smart choice for those looking to simplify their processes. With a broad selection of frequency options and no need for complicated pairing, installation is easy and efficient. Not only that, but the EMX WEL-200 also helps reduce hazardous working conditions by eliminating hardwiring.
Automatic Frequency Selection
With 25-Channel Automatic Frequency Selection, you don't have to worry about potential frequency interferences in the location you're using your receiver and transmitter. When powered on, it scans the local radio frequency (RF) of the environment and automatically avoids any channels with interfering sources. This also occurs during every future power-up so you can trust that you'll always get a clean connection with your WEL-200 systems. And if an interference source pops up, it's easy enough to manually trigger this auto frequency selection process.
Simple Pairing
EMX's WEL-200 is the perfect plug-and-play solution that allows you to create a secure connection. With this device, you can choose from one transmitter and receiver or link up to four transmitters with just one receiver. All of this is accomplished quickly and easily for minimal installation cost and time - no more worrying about hazardous wires running across your property. Best of all, once you've got your safety edges in place, the rest is a breeze.
Easy Installation
Without any wires needing to be measured and manually installed between the safety edge and the operator, this straightforward installation process is lightning fast compared to traditional wired sensors. Plus, as it doesn't need rechargeable batteries, wireless edge link also saves you on potential repair or replacement costs of wiring when making location changes. This make it a cost-effective, reliable choice.
EMX WEL-200 Safety Edge Sensor
Thanks to the integration capabilities, its user control options, and the fact that it can be configured for maximum efficiency, the EMX WEL-200 kit, formed by the WEL-200R receiver and the WEL-200T transmitter, is an edge link solution that cannot be beaten. For those looking for an efficient and secure gateway solution for their door or gate operations, the WEL-200 should most certainly be at the top of your list. If you require any further information regarding EMX's edge link products or have any questions about how they can benefit your operations please don’t hesitate to contact us.
