Phillip has a question regarding his Linear AK-11 Keypad...
Question: How can I keep the gate open with my keypad? I think that is called “Party Mode”
Answer: Hello Phillip, the feature you wish to use on your keypad is called “ Hold Open Code”. Please use the instructions below for your reference:
Enter programming by pressing # 9 # then the Master Code (Default: 1 2 3 4 5 6)
- Press 0 1 #
- Enter the new code and press #
- Enter the same code again and Press #
- Enter 1 0 and press #
To return to the original setting, follow the same steps and in step # 4 Enter 1 and press # When finished entering codes, press * * # to exit programming.
If you have any other question, do not hesitate to contact us toll free at 1-800-803-8093.
7 comments
terry
I know linear has a 7 day timer.
How do you use the timer with the ak-11 keypad?
Is there room to mount it in side housing?
Can you use a keypad code to enable timer control of gate?
All Security Equipment
Thank you for your comment. To better assist you, please give us a call at (800) 730-8382 to speak with one of our friendly sales representative who will gladly help you.
Antoine
How can I set the timer for the gate to automatic stay open after 7am and automatic close at 8pm?
All Security Equipment
Thank you for your comment, Priscilla. Please go to the link below, on the Installation Manual (page 6), under the product literature, you will find the steps for adding new entry codes to your AK-11 keypad. Please feel free to contact us if you have any further questions.
https://allsecurityequipment.com/products/linear-ak-11
PRISCILLA LOPEZ
How do I added a new code to my AK-11
Linear Access AK-11 Keypad??
All Security Equipment
Hello Patrick! Thank you for your comment. Please go to the link below, on the Installation Manual (page 7), under the product literature, you will find the programming options for the AK-11 keypad. Please feel free to contact us if you have any further questions.
https://allsecurityequipment.com/products/linear-ak-11
Patrick Cravens
Is there a way to change the hold open setting on a code without adding a new code? Can I change the hold open setting on a code? Also, if I delete a code, can I enter that code again on the keypad?
Thank you
Patrick Cravens