Skip to content
In a fence system, the gate hardware comprises of the parts and accessories that keep the gate secure. These indispensable parts enable the gate to function and perform its job. It primarily consists of gate hinges, latches, gate stops, handles, wheels and closers, and bolts.
These materials come in many choices you can mix and match for your gate frame. And because the gate is your primary defense against intruders, gate hardware heavy duty performance is a must.
Primary Gate Hardware
Gate hardware heavy duty determines the durability of the gate and its efficiency in safety and security. Gate hardware must withstand the elements since they are exposed to outdoor conditions.
For this reason, door hardware may not be the best alternative for gate hardware. The door lockset operates in a different mechanism, having an internal latch and strike plate. Unlike heavy-duty gate hardware, they are also not built to weather the elements.
Gate Hinge
Gate hinges are the bearings that allow the opening and closing of the gate, some of which are self-closing hinges. It attaches the gate and fence frame with a limited angle of rotation. Gate hinges bear the weight of the gate and its frame, so it needs to be heavy duty and quality material.
The traditional gate hinge is composed of two leaves, a knuckle and a pin. The leaf attaches to the post and the gate through screw holes that keep it in place. Some modern gate hinges have strap hinges or long leaves and are thicker than the traditional ones.
Gate hinge is subjected to outdoor elements, so choosing the most durable one is essential. Stainless steel is a premium material gate hinge for its rust and corrosion-resistant properties. Choosing a heavy-duty gate hinge is important. Otherwise, it will compromise the mechanism and functionality of the entire gate.
Gate Latches
The gate latches are one of the most crucial parts of the security feature of the gate. Latches can either be key-locking or secured by padlocks and devices. Gate latches are also classified as one-sided or two-sided.
One-sided locks are operable only on the inside part of the gate or door. Two-way gate latches are accessible both on the inside yard and the street side.
Gate latches are available and compatible with different types of gate materials. You can use them for stainless steel, aluminium, vinyl or wood gates and garage doors, whichever suits it best.
Gate latches have different types:
- Bolt latches secure the gate by sliding a rod into a securing bolt
- Gravity latches have latch arms that can push into a strike plate and fall into a catch
- Spring-loaded latches utilize spring components that snap the latch into place when pressure is applied
- Thumb latches close the gate through, and that falls into a catch. The thumb depressor on the outside part of the gate is used for lifting the arm off the hook to open it
- Magnetic latches are high-tech gate hardware heavy duty latches that close the gate and door through a magnetic mechanism without visible fasteners
Other types of gate latches include:
- Ring and lever latches
- T-latch
- Side-pull latch
- Butterfly latch
- Swimming pool latch
Gate Stops and Accessories
A gate stop is a solution for preventing the gate from swinging too far, which compromises the gate hinge. This helps prolong the life and condition of the gate, preventing its wear and tear. It is also used in doorways to prevent the door from slamming hard on the frame.
Gate kits or frames are added to the gate to prevent it from sagging. These are usually metal trusses or steel sleeves with a cable fitted on the gate's opening. It prevents the gate from dragging the fence board.
Drop bolts are simple locking mechanisms installed at the bottom of the gate to secure it into the ground. They are available in different lengths to cater to various gates and ground clearance types. Drop bolts keep the gate in place if you want to keep it open and have a locking option for closing it.
Guide Rollers
Guide and rollers are gate hardware for sliding gates and doors. They are the linear path that guides or rail to allow the gate to traverse in a linear motion along the fence. Rollers may be rubber or metal attached vertically on the top or bottom of a rolling gate. Rubber has a different installation procedure than metal but has a similar purpose of preventing the gate from tipping over.
Wheels and Tracks
The installation of tracks and wheels in gates is useful to facilitate easy opening and closing and provide structural strength and support. Fence gates attached to a heavy duty post do not necessarily need wheels. However, if the post is not sturdy, wheels become an important gate hardware heavy duty material.
Gate wheels are attached to the bottom of the gate with a U-bolt and screws and can roll in one direction. A v-track or v-groove wheel is commonly used in slide gates when the track is set on even concrete. Gates that do not roll on concrete have uneven terrain.
Gate Locks
Gate locks reinforce the gate latch to keep the gate fully secured. There are different categories of gate locks, like deadbolts, padlocks, mortise, keypads, and smart locks.
Many modern gates and doors use keyless options in mechanical, electronic or smart mechanisms. These gate hardware heavy duty options are the types of security systems that minimize physical intervention in gates.
Most of them function remotely because they are operable through fobs, remote devices or smart apps. They not only facilitate accessibility and convenience for users but also provide undisputable security in doors and entryways.
Why All Security Equipment?
If you need a selection of gate hardware heavy duty for your gate and door needs, visit us at All Security Equipment. We have a wide range of heavy duty gate and door hardware materials for your various needs. Contact us today for special offers of durable and long-lasting hardware kits that you need for the most reasonable price.
Unsure about the correct gate hardware for your entryway? Drop us an email, and we will be more than happy to assist you in finding the right match.
