Linear AM-SEK Serial to Ethernet Module Kit | All Security Equipment

If you have a Linear AM-3 access control panel, a Linear AE1000 or a AE2000 telephone entry system and need to access to it via Ethernet, then you need the AM-SEK Serial to Ethernet Converter.

The AM-SEK Serial-to-Ethernet Kit provides a standard network TCP/IP connection for Linear’s AM3Plus, AE1000Plus, and AE2000Plus access controllers. The module can be used as an alternative to a traditional telephone modem typically used for remote access to Plus panel controllers. The converter module connects between the Plus panel’s RS-232 Serial port and the installation’s network. Access to the network can be through a Local Area Network (LAN) or directly to a Wide Area Network (WAN).

Typically the module is connected to a port on a router located on the installation’s LAN. For easy configuration and setup, a Windows® based software utility is included on the installation CD. The utility software is used for setting the module’s IP address and the computers virtual COM port. The utility software is compatible with Windows XP®, Windows Vista®, and Windows 7®.

Leave a comment

All comments are moderated before being published