USAutomatic Ranger HD 1 Solar Charged Single Swing Operator Metal Cabinet with LCR | USA-020522
The USAutomatic Ranger HD I Solar is a single swing gate opener kit featuring a metal enclosure upgrade, designed to operate gates up to 16 feet wide and weighing up to 800 lbs. This solar-powered system offers reliable performance for heavy-duty gate automation.
Note: Battery Required for Operation (Battery not included)
If you need a dual gate operator system, click here.
Manufacturer's Warranty Period
- 3 years for components / 5 years for control board
Includes
- 1 Metal Cabinet with Cover 020570
- 1 Battery Controller 520001
- 1 LCR Dual Channel Receiver w/ Harness 030200
- 1 Secondary Entrapment Siren 530015
- 1 Quick Connect Plug and Go Harness 630041
- 1 Ranger HD Actuator 510006
- 2 LCR 2 Button Transmitter 030210
- 1 10-Watt Solar Panel Kit 520026
- 2 Safety Signs 601020
- 1 Set of Photo Eye Kit with Batteries 550011
Features
- Non-corrosive actuator and powder-coated galvanized control box
- PWM soft start and soft stop
- Battery under load monitoring
- Low battery audible notification
- Compatible with the USAutomatic Gate App
- Gate opening speed - 12 seconds
- Electronic limit control on board
- Designed to operate with a variety of common accessories
- Photo eye power management solar-friendly software
- Tested and certified to meet the current UL325 gate operator safety standards
- Qualifies for a 30% federal tax credit
Technical Specifications
- Style: Swing
- Gate Setup: Single
- Applications: Residential, light commercial, farm, ranch
- Max. Swing Angle: 120°
- Max. Gate Width: 16’ each leaf
- Max. Gate Weight: 800 lbs. each leaf
- Power Input: 12-volt DC battery, solar charged
- Drive: Non-corrosive 24" linear actuator
- Speed: 12-second cycle (90° opening)
- Dynamic Thrust: 580 pound force
- Static Load Hold Rating: 4,000 pound force
- Radio Receiver: Pre-wired solar-friendly LCR dual channel receiver; extended range antenna included
- Remote Control: Two 2-button remotes included
- Adjustable Soft/Start/Stop: Yes, using pulse width modulation software
- Limit Control Type: Electronic adjusted on the control board
- Independent Adjustments: Independent gate safety sensitivity adjustments
- Timer to Close: Built-in, adjustable from 2 to 120 seconds
- Safety Photo Eyes: 1 set included
- Control Box Enclosure: Powder-coated galvanized steel
- Installation: Push-to-open and push-to-close brackets included
- Safety: ETL tested and certified to meet UL 325 safety regulations for Class I, II, III, and IV installations
- Country of Manufacture: United States
Recommended Battery Type
Battery 12-volt, Group U-1; sealed (maintenance-free); 30 amp-hour minimum. Using a smaller amp-hour battery may cause damage to the charging system. The wiring harness has two 1/4” ring terminals to connect to battery posts.
Caution!!! Do not install a wet cell battery into the control box; this type of battery usually has removable caps used for service and will vent into the control box.
Product Literature
Find answers to our most frequently asked questions below. Got more questions? Reach out to our friendly customer service team, they will be more than happy to assist you.