Ritron HD Series 2-Way Radio Analog Callbox

• Wireless, 2-Way, Push-to-Talk, Narrowband Technology
• Improved Range Performance
• 800mWatt (if using Battery), 2 Watt Transmit Power (if using external power supply)
• Loud, Easy-To-Hear Audio Output (Adjustable)
• Rugged, Fiberglass Reinforced Enclosure, Vandal-Resistant
• Weatherproof, Gasket-Sealed
• Hinged Door w/ Captive Security Fasteners
• Built-In Antenna, Provision For External Antenna If Needed
  ◦ *Note: Built-in antenna *Note: To equip your HD callbox with an external antenna, you will need an Optional external antenna cable PN 60201125 (not included)
• Built-In Relay For Remote Access Control (Gate Controllers) or Strobe Light Accessory
• Recordable Voice Messages (Greeting, Alert, Low Battery, Power Fail Message)
• Sensor Input (Open/Close) w/ Recordable Voice Message, Auto-Transmit On Sensor Detect
• Battery-Powered Capable. The HD-Series Callbox can be powered by 6 Alkaline D-cell batteries.
• External Power +12 VDC Capable. The HD-Series Callbox can be powered by an external +12 VDC source. This method of powering the callbox allows the radio to remain ON at all times, like an intercom.
• Selective Signaling – CTCSS & DCS Encode/Decode, DTMF Encode/Decode, SelCal Encode/Decode, 2-Tone Decode Only

Entry KEYPAD FEATURES

• Vandal Resistant - Stainless Steel Weather Resistant Design
• Programmable - Add, modify, or delete user codes from the entry pad
• Illuminated Keypad - Allows easy use of the keypad at night
• Audible feedback on key presses
• 502 possible codes - 1 Temporary, 1 Master code
• Variable length codes - 3 to 8 digits
• 5 VDC or 12-24 VDC Input Voltage (Keypad only)

• RF Channels: 1 Channel Analog (12.5KHz)
• Signaling: CTCSS & DCS Encode/Decode, DTMF Encode/Decode, SelCal Encode/Decode, 2-Tone Decode Only
• Dimensions:  8” H x 6” W x 4” D
• Weight: 2.75 lbs
• Enclosure Material: Gasket Sealed, Reinforced Fiberglass, Hinged Door, Security Fasteners
• Colors:  High-Viz Green
• Environmental: Weatherproof, shock, and vibration per Ritron test
• Operating Temperature: -4°F to 131°F (-20°C to +55°C) Battery rating. At 0°C the capacity is < 50% rated) Talk range will decrease at low temperatures when operating on alkaline batteries.
• Programming: Field programming capability of limited parameters. Full programming capability using the internal USB Connector is used for full PC Programming.
• Built-in Remote Control Relay (7 Series): Can be used to remotely control gates, doors, or strobe lights. (7 Series) Relay switch is controlled when the callbox receives the pre-programmed selective signaling command code.

> SPDT, 3A, 125VAC/30VDC – Normally Open or Normally Closed (NO Default). Modes of Operation: Momentary or Toggle, On/Off.

> Aux Sensor Monitoring Input: Optional sensors (not included) used to detect motion, gate movement, vandal/tamper, or vehicle presence can be connected to the callbox using the sensor input.

> Sensor input responds to an Open or Closed switch. Callbox will send either an alarm tone or a recordable voice message when the optional switch/sensor detects a change.

> Can also be programmed to automatically turn the callbox ON and transmit a recordable voice message or alarm tone to radios monitoring callbox activity.

• Adjustable Speaker Volume: Adjustable 20% to 100%
• Automatic Turn-Off Feature: Conserves batteries. Selectable turn-off times will automatically turn the callbox off after a set period of inactivity on the radio channel. Auto Turn-OFF feature must be enabled when using battery-only power.
• Always On Feature:  Callbox can be powered in Always On mode with an optional external power supply (pn RPS-EXPO, 110-220V AC adapter, not included). Allows incoming calls to be heard at any time.
• Listen-In Feature: Callbox can be selectively paged to allow remote monitoring of audio in the vicinity of the callbox.
• Busy Channel TX Inhibit: Prevents Callbox from transmitting if someone else is using the radio channel.
• Recordable Voice Messages: Greeting Message/Send Call Alert Message/Sensor ON/Sensor OFF/ Low Battery Message/Send Power Fail Message/Auto “Re-Send” - Selectable 0-5 times.
• Battery Life:  D-Cell Alkaline Batteries: Number of Transmissions: Approximately 6,000 based on a duty cycle of: 3 Seconds Receive, 3 Seconds Transmit, 10 Seconds Standby

• RItron HD Series 2-Way Radio Callbox Analog Brochure
• RItron HD Series 2-Way Radio Callbox Analog Manual
• RItron HD Series Radio Callbox vs XT Series Radio Callbox