Ritron DTX LS Wireless Transceiver Data Module Radio in Housing

Ritron DTX LS Wireless Transceiver Data Module Radio in Housing

The DTX-Ls Series wireless transceiver modules are high-performance, cost-effective, low current drain, single-board OEM transceivers available in VHF and UHF frequency bands.

High specifications permit integration into systems demanding the utmost performance in frequency congested environments. This single-board radio is available as a board-only model or installed in an extruded aluminum enclosure, both versions are FCC and Industry Canada Approved.

The DTX-Ls transceiver features all electronic tuning (no mechanical adjustments), available in 2 to 8 Watt UHF Models and 2 to 5 Watt VHF models, and supports voice or data applications and sub-audible signaling CTCSS or Digital Coded Squelch.

Includes

• Single Printed Circuit Board
• Programmable RF Transceiver Installed in Metal Enclosure with BNC Antenna Connector
• DB-15 Data / Power Connector

Features

• All electronic tuning (no mechanical adjustments)
• Same mechanical footprint and electrical interface as the current DTX-Ls (allows drop-in backward compatibility)
• Available in 2 to 8 Watt UHF Models and 2 to 5 Watt VHF
• Supports voice or data applications
• Supports sub-audible signaling CTCSS or Digital Coded Squelch
• PC programmable via a Windows-based
• PC programmer
• All components are placed on the top side of a single PCB for mechanical rigidity and increased protection against damage
• Solid internal ground plane for enhanced EMI shielding
• Surface acoustic wave (SAW) filter front-end for no-drift, adjustment-free filtering off interfering signals (DTX-445)
• Monolithic Gilbert cell mixer with internal negative feedback for improved RF intermodulation performance
• Ritron exclusive flex-divider PLL synthesizer allows for a wide loop bandwidth for fast transmit and receive attack times and minimal microphonics
• Audiophile-grade polypropylene capacitors in the PLL loop filter for further reduced microphonic susceptibility

Manufacturer's Warranty

• 1 Year

Established DTX Ls

• Low standby current drain facilitates long battery life in battery-powered applications
• High receiver sensitivity
• Single board design for high reliability
• Ritron’s made in the USA design, manufacturing, and service expertise
• FCC Narrow Band Compliant and Industry Canada approved module (board only or with enclosure), allows for easier integration into OEM applications without regulatory concerns
• Various connector/module options allow for flexibility in OEM integration

Technical Specifications

• FCC ID: AIERIT17-445 (UHF DTX-445). AIERIT17-145 (VHF DTX-145)
• Industry Canada ID: 1084A-RIT17445 (UHF DTX-445). 1084A-RIT17145 (VHF DTX-145)
• FCC Rule Parts: 90
• Industry Canada Rule Parts: RSS-119
• Frequency Range: 400.6 – 416.5†, 411 – 429†, or 450 - 470 MHz (UHF DTX-445). 136 to 174 MHz (VHF DTX-145)
• RF Channels: 8 Independent TX/RX frequencies
• Synthesizer Step: 6.25kHz (UHF DTX-445). 2.5kHz (VHF DTX-145)
• Channel Spacing: 12.5kHz
• Frequencies unusable: TBD
• Frequency Stability: (UHF DTX-445) +/-1.5 PPM (-30° to +60° C). (VHF DTX-145) +/-2.5 PPM (-30° to +60° C)
• Tone/Code Signaling: CTCSS (Quiet Call) and DCS
• Power Supply: 9 to 17 VDC
• Dimensions & weight: Encased version: 5.7”x 3”x 1.375” / 7.3 oz.
  
• Antenna Fitting: BNC female with encased version. Another option available is a board-only version.

DTX-446-0BN5E

• EU/CE Parts: EN 300 086 v 2.1.2, EN 301 489
• Australia/New Zealand Parts: AS/NZS 4295:2015
• Frequency Range: 450-490 MHz
• Synthesizer Step Size: 6.25 kHz nominal (250 Hz possible most frequencies)
• Channel Spacing: 12.5 kHz
• Frequency Stability +/- 1 ppm (-40°C to +70°C)
• Sub-audible Signaling: CTCSS and CDCSS
• Power Supply: 9-17 VDC
• Dimensions and Weight: In Enclosure: 14.5 cm x 6.6 cm x 3.5 cm @ 204 gm
• Antenna Fitting: BNC female with encased version. Another option available is a board-only version.

Product Video

Product Literature

• Ritron DTX-Ls Series Brochure
• Ritron DTX-446 Brochure