Skip to content
Estimate shipping
Multi-Code 1-Channel 12-24V Gate Receiver | MUL-109950
The Model 109950 1-Channel, 12-24V, Gate Receiver is designed for use in gate operator applications. The whip antenna connects to the receiver’s Type-F antenna connector. Also included are 3 feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 106603 Remote Whip Antenna can also be used with this receiver.
The Model 109950 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency. The 300 MHz frequency is compatible with standard Multi-Code transmitters, the 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator’s radio activation terminals.
The receiver is programmed with a 10-position coding switch. When a transmitter set to the same code is activated, the receiver’s output will activate, triggering the gate operator.
Includes
- 11-inch wire whip antenna
- 3 feet of coaxial cable
- Bulkhead connector
Features
- Operates on 12-24 volts AC or DC power
- One channel
- Programmed with a 10-position coding switch
- Dual frequency receiver
Compatibility
- The Model 109950 is compatible with Multi-Code and Stanley transmitters only.
Technical Specifications
- Codes: 1,024 (set by dip switches)
- RF frequency: 300 MHz or 310 MHz (jumper selectable)
- Dimensions: 3.625″ W x 5.25″ H x 1.5″ D
Product Literature
Find answers to our most frequently asked questions below. Got more questions? Reach out to our friendly customer service team, they will be more than happy to assist you.