Skip to content
Estimate shipping
Genie GCL-GT Heavy Duty Gear Head Trolley Door Operator with Brake - 3/4HP, 3 Phase
The GCL-GT is designed for standard lift sectional doors that have up to 60-cycle/hour duty requirements. Advanced features and robust mechanical design combine to provide a heavy-duty operator that sets a new standard for productivity.
Includes
- Standard Photo-eyes
- 3 Button Control Station
- Disc Brake
- Chain Guides
- Drawbar Arm
- Trolley Chain
- Rail Pair
This is an All in One Pre-Packaged System
UL 325 2010 APPROVED
Allows for monitored entrapment connections for protection and momentary operation when used with select photo eyes and/or edge-sensing devices.
GCL-GT Advantages
- MultiVolt® - Order phase-specific operator for the job and have the ability to select the right voltage on the job site.
- Three Phase: 208/230/460V AC
- Maximum Door Weight:
- Sectional: 1450 lbs.
- Modular design with optional expansion boards for an advanced timer to close, and auxiliary output functionality.
- LCD display with intuitive setup menu. Provides current status and trouble-shooting assistance.
- Internal receiver with the ability to individually add/delete up to 50 Intellicode® transmitters directly from the LCD display.
- EZ Limit® provides for push-to-set limits that stay synchronized with the door through a long-term loss of power.
- The low-profile height of the powerhead maximizes the clearance for vehicular traffic.
- Open/close/stop and setup keys are included on the control board. Keeps all controls near the LCD display convenient for set up.
- The quiet trolley carriage with high-strength wear pads eliminates the need to apply grease to rails.
Standard Features
- EZ Limit® electro-mechanical limits.
- MultiVolt® voltage simplification.
- Max run timer automatically adjusts to up and down run time.
- Heavy-duty worm gearbox for primary reduction.
- Delay on reverse.
- 16-character LCD display.
- UL 325 2010 approved.
- Advanced radio receiver displays and stores activation by a transmitter ID number on the LCD screen.
- 3-button control station.
- 2-year/20,000 cycle warranty.
- Programmable mid-stop.
- Drawbar disconnect for emergency manual operation.
- DC disc brake with progressive braking.
Construction
- Motor: AC continuous-duty motor. Motor replaceable without changing limits. Thermally protected.
- Drive: Primary - Heavy-duty worm gear running in oil bath. All-weather synthetic lube for low/high-temperature operation. Secondary - Heavy-duty chain and sprocket reduction.
- Brake: 24V DC disc brake standard.
- Friction Clutch: Adjustable clutch to help protect against door and operator damage.
- Precision Radial Ball Bearings: Used exclusively throughout the operator powertrain.
- Rail Assembly: 2" heavy-gauge roll-formed angle with nylon chain guides.
- Emergency Disconnect: Drawbar disconnect via pull cord for manual operation of the door.
- Pre-wired to accept: Monitored entrapment devices such as photo eyes. Single or 3-button control stations. External interlock switches.
- On-Board timed close: Set via LCD display from 2 seconds to 5 minutes.
- Timer to Close Module: Timed close-set via the LCD display from 2 seconds up to 5 minutes. Includes pre-close warning contacts, timer hold input, auxiliary open input, normally closed safety input, and monitored edge input.
Product Literature
Find answers to our most frequently asked questions below. Got more questions? Reach out to our friendly customer service team, they will be more than happy to assist you.