Estimate shipping
EMX Multi-Voltage Vehicle Loop Detector EU Wiring EU Wiring | EMX-ULT-MVP-E
The ULTRALOOP® multi-voltage vehicle loop detector combines small size with a 12VDC to 240VAC input range.
The ULT-MVP provides relay contact outputs indicating vehicle presence, and the second set of contacts that may be used for loop fault, pulse on entry /pulse on exit, or Detect-On-Stop™ (DOS®). The ULT-MVP features automatic sensitivity boost (ASB),
2-second delay, fail-safe/fail-secure, and infinite or normal (5 min.) presence.
The detector is easily installed and has user-friendly features that simplify set-up,
operation, and troubleshooting. Sensitivity selection is simplified by the ULTRAMETER™ display that indicates the appropriate sensitivity setting with the vehicle positioned on the loop. The 10 sensitivity settings allow for finer adjustment of the detection level, while the 4 frequency selections provide greater flexibility in preventing crosstalk in multi-loop applications.
Features
- Presence output
- Output B
- Pulse entry/exit
- Detect-On-Stop
- ABS
- Delay
- Normal/infinite presence
- Loop fault output
Manufacturer's Warranty
- 2 Years
Connections
- Loop: 7
- Loop: 8
- Ground: 9
- Power: 1
- Power: 2
- Presence - Relay 1 NC contact:10
- Presence - Relay 1 common contact: 6
- Presence - Relay 1 NO contact: 5
- Relay 2 NO contact: 3
- Relay 2 common contact: 4
- Relay 2 NC contact: 11
Technical Specification
- Sensitivity: 10 levels, 0-9
- ULTRAMETER™ Display: Indicates optimum sensitivity level, 0-9 Diagnostic aid
- Loop Frequency: 4 settings (low, med-low, med-hi, high)
- Loop Inductance: 20…2000µH (Q factor > 5)
- Grounded Loop: Isolation transformer allows operation with poor quality loops
- Automatic Tuning: Detector tunes to loop on power-up and following frequency count function
- Environmental Tracking: Automatic compensation
- Surge Protection: Loop circuitry protected by surge suppressors
- Presence Relay: SPDT relay contacts (form C)
- Output B Relay: SPDT relay contacts (form C)
- Contact Rating (Resistive Load): 2A @ 30VDC, 0.5A @ 125VAC
- Power / Loop Fault Indicator: Green LED
- Detect / Frequency Count Indicator: Red LED
- Detect-On-Stop™: Requires vehicle to stop for a minimum of 1 second (1-2s typical)
- ASB (Automatic Sensitivity Boost): Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
- Power: 12...60 VDC (Max. 0.8 VA) 12…240 VAC (48…62Hz) (Max. 1.4 VA)
- Operating Current: 20mA standby / 50mA detect
- Operating Temperature: -40˚C…82˚C (-40˚F…180˚F) 0…95% relative humidity
- Dimensions (L x W x H): 73mm (2.9”) x 38mm (1.2”) x 78mm (3.1”)
- Weight: 0.25 lbs. (113 g)
- Housing: ABS plastic, IP30
- Connections: Socket mount - 11 pin male (JEDEC B11-88)
Vehicle Loop Detector Video
Product Literature
Find answers to our most frequently asked questions below. Got more questions? Reach out to our friendly customer service team, they will be more than happy to assist you.