Estimate shipping
EMX Two Channel Multi-Voltage Vehicle Loop Detector EU Wiring | EMX-ULT-MVP-2E
The ULTRALOOP® two-channel multi-voltage vehicle loop detector combines small
size with a 12VDC to 240VAC input range.
The ULT-MVP-2 provides relay contact outputs indicating vehicle presence, pulse, AB logic (directional mode), or the new EMX feature, Detect-On-Stop™ (DOS®) for each channel. The ULT-MVP-2 features automatic sensitivity boost (ASB) and infinite or normal (5 min.) presence.
The detector is easily installed and has user-friendly features that simplify set-up, operation, and troubleshooting. Sensitivity selection is simplified by the ULTRAMETER™ display that indicates the appropriate sensitivity setting with the vehicle positioned on the loop. The 10 sensitivity settings allow for finer adjustment of the detection level, while the 4 frequency selections provide greater flexibility in preventing crosstalk in multi-loop applications.
Features
- Presence/pulse output
- AB logic
- Detect-On-Stop
- ABS
- Normal/infinite presence
Connections
- Power: 1
- Power: 2
- Channel 1 loop: 3
- Channel 1 loop: 4
- Channel 2 loop: 5
- Channel 2 loop: 6
- Channel 2 NO contact: 7
- Channel 2 common contact: 8
- Ground: 9
- Channel 1 NO contact: 10
- Channel 1 common contact: 11
Manufacturer's Warranty
- 2 Years
Technical Specifications
- Sensitivity: 10 levels, 0-9
- ULTRAMETER™ Display: Indicates optimum sensitivity level, 0-9 Diagnostic aid
- Loop Frequency: 4 settings (low, med-low, med-hi, high)
- Loop Inductance: 20…2000µH (Q factor > 5)
- Grounded Loop: Isolation transformer allows operation with poor quality loops
- Automatic Tuning: Detector tunes to loop on power-up and following frequency count function
- Environmental Tracking: Automatic compensation
- Surge Protection: Loop circuitry protected by surge suppressors
- Presence Relay: Loop circuitry protected by surge suppressors
- Output B Relay: SPST relay contact (form A)
- Contact Ratings: 1A @ 24VDC…120VAC
- Power / Loop Fault Indicator: Green LED
- Detect / Frequency Count Indicator: Red LED
- Detect-On-Stop™: Requires vehicle to stop for a minimum of 1 second (1-2s typical)
- ASB (Automatic Sensitivity Boost): Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
- Power: 12VDC…24VDC, 24VAC
- Operating Current: 15mA standby / 45mA detect
- Operating Temperature: -40˚C…82˚C (-40˚F…180˚F) 0…95% relative humidity
- Dimensions (L x W x H): 73mm (2.9”) x 38mm (1.2”) x 78mm (3.1”)
- Weight: 0.25 lbs. (113 g)
- Housing: ABS plastic, IP30
- Connections: Socket mount - 11 pin male (JEDEC B11-88)
Videos
Product Literature
Find answers to our most frequently asked questions below. Got more questions? Reach out to our friendly customer service team, they will be more than happy to assist you.