EMX UL325 Retroreflective Photoeye Kit | EMX-NIR-50-325-KIT

EMXSKU: EMX-NIR-50-325-KIT

Price:
Sale price$97.99

Estimate shipping

EMX UL325 Retroreflective Photoeye Kit | EMX-NIR-50-325-KIT

The NIR-50-325 retroreflective photo eye kit, also known as EMX-5255-K, is an external entrapment protection device type B1, a non-contact sensor for use with gates, overhead doors, and barriers. The device is UL325 compliant and configured for normally closed (NC) and 10K monitored operation features a built-in resistor.

The NIR-50-325 is an extended-range, retroreflective photoeye sensor providing entrapment protection for overhead doors, gates, and barriers. The NIR-50-325 is a UL325 2018 compliant and features an internal 10K resistor for monitored operation. Its flexible voltages, compact design, and LED indicators make this photoeye easy to install.

Note: This retroreflective photoeye is not compatible with operators that use NO and COM (non-10K) monitoring methods.

Includes
  • Photoeye with Hood
  • Reflector with Hood
Features
  • Retroreflective configuration
  • NC and 10K monitoring
  • 50 ft. operating range
  • Sensitivity adjustment
  • Wide range operating voltage
  • IP66 enclosure
Manufacturer's Warranty
  • 2 Years
Technical Specification
  • Operating Range: Up to 50 feet
  • Sensitivity Adjustment: Potentiometer
  • Signal Stability Indicator: Yellow LED
  • Alignment Indicator: Red LED
  • Relay Output: Form C contacts (NO, COM, NC), 30VAC/VDC, 2A
  • Resistive Termination: 10k Ohm (internal)
  • Response Time: 10ms
  • Power: 12…30VDC, 24…30VAC @ 60 Hz
  • Current Draw: 83mA
  • Operating Temperature: -4°…131°F (-20°…55°C)
  • Environmental Protection: IP 66 IEC
  • Dimensions (L x W x H): 1.3” (33mm) x 0.8” (21mm) x 2.6” (66mm)
  • Weight: 0.2 lbs. (91g)
  • Connections: 5 wires, 6.5’ (2m) cable
  • Certifications: CE, and UL325 compliant
Cautions and Warnings
  • This product is an accessory or part of a system. Install the NIR-50-325 according to the instructions from the gate or door operator manufacturer.
  • Comply with all applicable codes and safety regulations. Retroreflective photoeyes rely on a reflective surface (a reflector) for proper operation. In some cases, a vehicle with a reflective surface at a given distance can act as a reflector and allow the gate to close on a vehicle.
Product Video
Product Literature

You may also like

Recently viewed