AES e-Loop Inground Commercial Loop Only (EXIT MODE) | AES-EL00IG
The Inground Wireless Vehicle Detection System uses magnetometer sensors to detect the presence and movement of vehicles. These detections are transmitted to a nearby transceiver for gate activation. The sensors are installed in the ground of entry or exit passages using sikaflex, contain a replaceable Lithium battery, and can withstand
almost any vehicle.
Note: Gate or door controller must have a dedicated open input and autoclose function enabled.
Features
- High-security 128-bit encryption.
- Quick and easy installation
- Recesses into the driveway – 55mm inground height x 89mm diameter (2.1” x 3.5”).
- Not affected by ground movement.
- 14500 mA battery (included) giving up to 6-10 years of battery life (depending on mode).
- Top access for changing the battery.
- Up to 50 meters range.
Manufacturer's Warranty Period
- 2 Years
Technical Specifications
- Power: 1 * 3.6 V 14500ma
- Dimensions: 88*88*55mm
- Weight: 300g
- Environment
- designed for inground (flush) mounting
- IP68 ingress Protection
- Operating Temp: -20° to 80° C (-4°F to 176°F)
- Standby Power: 14μA
- Activation Power: 50mA
Compliance
- Safety: Tested to CE Approval
- EMC: Tested to EN 301 489-1 V2.2.3 “ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements; Harmonized Standard for Electro Magnetic Compatibility” Including:
- a) Emissions to EN 55032 “Electromagnetic compatibility of multimedia equipment”
- b) Transmitter and receiver test to EN 300 220-1 V3.1.1 ‘Short Range
Devices (SRD) operating in the frequency range 25MHz. to 1000MHz; Part 1: Technical Characteristics and methods of measurement.” - c) Immunity Tests to EN 301 489-1
Product Literature
Find answers to our most frequently asked questions below. Got more questions? Reach out to our friendly customer service team, they will be more than happy to assist you.