EMX Two Channel Multi-Voltage Vehicle Loop Detector ULT-MVP-2E
Roll over image to zoom in Click on image to zoom
EMX Two Channel Multi-Voltage Vehicle Loop Detector ULT-MVP-2E

EMX Two Channel Multi-Voltage Vehicle Loop Detector EU Wiring | EMX-ULT-MVP-2E

Write a review
EMXSKU: EMX-ULT-MVP-2E
Price:
$146.50

Estimate shipping

EMX Two Channel Multi-Voltage Vehicle Loop Detector EU Wiring | EMX-ULT-MVP-2E

The ULTRALOOP® two-channel multi-voltage vehicle loop detector combines small
size with a 12VDC to 240VAC input range.

The ULT-MVP-2 provides relay contact outputs indicating vehicle presence, pulse, AB logic (directional mode), or the new EMX feature, Detect-On-Stop™ (DOS®) for each channel. The ULT-MVP-2 features automatic sensitivity boost (ASB) and infinite or normal (5 min.) presence.

The detector is easily installed and has user-friendly features that simplify set-up, operation, and troubleshooting. Sensitivity selection is simplified by the ULTRAMETER™ display that indicates the appropriate sensitivity setting with the vehicle positioned on the loop. The 10 sensitivity settings allow for finer adjustment of the detection level, while the 4 frequency selections provide greater flexibility in preventing crosstalk in multi-loop applications.

Features
  • Presence/pulse output
  • AB logic
  • Detect-On-Stop
  • ABS
  • Normal/infinite presence
Connections
  • Power: 1 
  • Power: 2
  • Channel 1 loop: 3
  • Channel 1 loop: 4
  • Channel 2 loop: 5
  • Channel 2 loop: 6
  • Channel 2 NO contact: 7
  • Channel 2 common contact: 8
  • Ground: 9
  • Channel 1 NO contact: 10
  • Channel 1 common contact: 11
Manufacturer's Warranty
  • 2 Years
Technical Specifications
  • Sensitivity: 10 levels, 0-9
  • ULTRAMETER™ Display: Indicates optimum sensitivity level, 0-9 Diagnostic aid
  • Loop Frequency: 4 settings (low, med-low, med-hi, high)
  • Loop Inductance: 20…2000µH (Q factor > 5)
  • Grounded Loop: Isolation transformer allows operation with poor quality loops
  • Automatic Tuning: Detector tunes to loop on power-up and following frequency count function
  • Environmental Tracking: Automatic compensation
  • Surge Protection: Loop circuitry protected by surge suppressors
  • Presence Relay: Loop circuitry protected by surge suppressors
  • Output B Relay: SPST relay contact (form A)
  • Contact Ratings: 1A @ 24VDC…120VAC
  • Power / Loop Fault Indicator: Green LED
  • Detect / Frequency Count Indicator: Red LED
  • Detect-On-Stop™: Requires vehicle to stop for a minimum of 1 second (1-2s typical)
  • ASB (Automatic Sensitivity Boost): Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
  • Power: 12VDC…24VDC, 24VAC
  • Operating Current: 15mA standby / 45mA detect
  • Operating Temperature: -40˚C…82˚C (-40˚F…180˚F) 0…95% relative humidity
  • Dimensions (L x W x H): 73mm (2.9”) x 38mm (1.2”) x 78mm (3.1”)
  • Weight: 0.25 lbs. (113 g)
  • Housing: ABS plastic, IP30
  • Connections: Socket mount - 11 pin male (JEDEC B11-88)
Videos



 Product Literature

You may also like

Recently viewed