Ritron TeleSwitch® Wireless Switch Control
When hard wiring is impractical or impossible, the Ritron TeleSwitch is ideal for any application where a contact closure is needed to remotely control a light, turn a pump on/off, activate a siren, etc.
The TeleSwitch has two independently controlled relays, each providing a contact closure output upon receiving a uniquely defined DTMF (touch-tone) code. This innovative two-way radio product consists of an RF transceiver and programmable DTMF decoder housed in a durable, weather-tight enclosure. The newly designed TeleSwitch combines rock-solid engineering with advanced solid-state technology for reliability and ease of use.
Applications for the economically priced TeleSwitch are endless. Use for Electric/Gas Utilities, Petroleum, Chemical, Water/Waste Treatment Plants, Environmental Monitoring, Food/Agriculture Operations, as well as general manufacturing and industrial processes.
Includes
- TeleSwitch radio transceiver with (2) DTMF controlled 10 Amp relays
- (1) BNC dual-band flexible antenna
- (2) Flush Mount Brackets
- (1) 110VAC to 12VDC @ 1.25 amps cube power supply
Features
- 5/2 Watt Transceiver
- PC Programmable
- VHF and UHF Frequency Band Models
- Wide or Narrow Band Models
- 8-15VDC Operation
- Two 10 Amp Relay Outputs, Each Independently DTMF Controlled
- Programmable Relay Control - Momentary or Latching Mode
- Bright LED Indicators for Power, Relay Status
- Rugged, Weather Tight Enclosure
- DTMF Decode Acknowledgement Tone
- Long Range (miles not feet) Radio Control
- No Trenching or Remodeling
- Easy Add-On to Existing Radio Systems
- Simple to Install
- Works through Repeaters for Even Longer Range
- Self Contained, All-in-One Solution
Manufacturer's Warranty
- 1 Year
Technical Specifications
- Frequency Range: VHF: 136-156 or 154-174 MHz UHF: 400-420 or 450-470 MHz
- RF Channels: 8 Independent TX/RX frequencies
- Synthesizer Step Size: 2.5 kHz VHF, 6.25 kHz UHF
- Frequency Stability: +2.5 PPM (-30° to + 60°C)
- Tone/Code Signaling: CTCSS (Quiet Call) and/or DCS (Digital)
- Input Voltage: 8 to 15VDC
- Input Current: 1.5 A max. @5W
- Relay Contact Rating: 10A@125VAC
- Relay Operation: Programmable-Latching or Momentary (0.5 sec)
- LED Indicators: Power On, Relay Open/Closed
- Battery Drain (Standby): 20mA@13.8VDC
- Dimensions (with Housing): 3.0" H x 5.0" W x 7.0" D (less connectors)
- Weight: 26.5 oz
- Antenna Fitting: BNC (board only), module includes SMA Connector
Note
- The TeleSwitch Transceiver requires the Ritron PC programming kit model DTXL-PCPK-2.0
Product Literature
Find answers to our most frequently asked questions below. Got more questions? Reach out to our friendly customer service team, they will be more than happy to assist you.