Skip to content
Estimate shipping
Linear Omni-directional Remote Antenna | LIN-EXA-1000
Designed to enhance the radio range of Linear’s receivers. This antenna can be connected to the F connector on many Linear receivers to improve their range when they must be located in poor signal reception locations. Usually, an increase of 20-30% range can be expected. The versatile EXA-1000 can be mounted in a variety of ways. A 2-inch U-bolt is supplied for post or pipe mounting, or the U-bolt holes in the Base Plate can be used to screw the antenna to a wall or vertical wood brace or beam.
The EXA-1000 is a 1/2 wave, center-fed, vertical antenna composed of three parts: an Antenna assembly with an F connector attachment; a Base Plate assembly with radial mounting provisions; and a five-foot, 75-ohm coaxial cable. The cable connects to the antenna base on one end and the receiver F connector on the other. If the antenna must be mounted further than five feet from the receiver, an extension cable of up to a maximum of 25 feet may be used instead of the five-foot cable supplied. Because of the cable resistance, the performance of the EXA-1000 may be degraded by using longer than a 25-foot cable.
Includes
- 5 feet of coax
- U-bolt for post mounting
Features
- Receives signals in 288 to 320 MHz range
- Omni-directional remote antenna
Technical Specifications
- Dimensions: 3″ W x 19.5″ H x 6″ D
Compatibility
- This product is compatible with all Linear receivers with a Type F antenna connector
Note
- Generally, the higher the antenna is mounted above ground level, the better the radio range will be.
Product Literature
Find answers to our most frequently asked questions below. Got more questions? Reach out to our friendly customer service team, they will be more than happy to assist you.