FAAC Handicapped Access Control System Electric Door Opener Kit With Slide Pulling Arm | FAA-950N2-10RDSLIDE

FAACSKU: FAA-950N2-10RDSLIDE

Price:
Sale price$1,362.00

FAAC 950N2-10RD-10EMR Handicapped Access Control System Electric Door Opener Kit With Slide Pulling Arm

This model represents FAAC's latest version of model 950-N electric door opener, which replaces the old model 950-BM. Digital Receiver 433 Mhz frequency. Includes integral sequencing "learn" buttons (for vestibule applications), pulse/toggle functionality and additional hold time. The 433 MHz Series Transmitters and Receiver are ideal for the wireless activation and/or sequencing of automatic doors. A unique rolling code is transmitted each time the transmitter is activated (thus providing a secure signal). Since receivers can be individually programmed, multiple receivers can be programmed differently thus allowing for sequencing in multiple applications. Those receivers programmed with NO DELAY will be active immediately upon receiving the transmitter signal. Those receivers programmed with a DELAY will activate at the end of their pre-determined time delay set by the potentiometer. The use of multiple receivers will allow for the uninterrupted pace or hands free operations through a pair of doors upon initial activation. The push button exit features a round slim profile with a blue Handicap logo and blue "push to open" text.

The new FAAC 950N2 (FAAC's Best selling Door Opener) is a silent and stylish swing door opening and closing unit that is reliable, safe, and suitable for hands-free and handicapped access. This model has a SLIDE arm which is for frame mounting only for inswinging doors. The FAAC 950N2 model is a spring-based system.

Model 10RD433 Receiver
  • Operates with a unique rolling code each time the switch is activated
  • Multiple applications (i.e. Vestibule) with Delay or No Delay programming
  • 100 transmitters can be programmed into a single receiver
  • Removal of a single transmitter code
  • Up to 4 separate wireless Receivers can be activated by a single Transmitter (i.e. 4-Button)
  • Red LED indicator on Transmitter confirms transmission and battery life
  • 12-Volt Type A23 Battery Power
Model 10EMR4751 Round Push Button Exit
  • Plate arrives fully-assemble significantly reducing installation time
  • Tamper-resistant recessed plate with beveled edges can be directly installed to any flat surface such as a wall or mounting post
  • Weather boot between plate and back plate for all weather applications.
  • All-active plate made of durable stainless steel
FAAC 950N2 includes all the features of the 950 BM plus
  • USB port for firmware updates and download / upload configuration, timer, events log
  • BASIC programming with on board by dip-switches and trimmers (same functions as the 950N)
  • New KP EVO unit allows ADVANCED and COMPLETE programming
  • Same connection terminals pinout of the 950N with the same functions to facilitate replacements. Just disconnect the terminal block from the old operator and connect it to the new one. (The only exception is the J6 - I/O terminal block that has been modified to introduce the new CANBUS interface)
  • CANBUS for a "smart" management of:
    • - INTERMODE: one master and up to 14 slave units sharing the same operating mode
    • - INTERLOCK: two doors, the opening of one is subordinate to the closing of the other
    • - MASTER / SLAVE: Connection of two synchronized operators on double doors
    • - INTERLOCK + MASTER / SLAVE (a combination of the two above)

  • 8 programmable inputs (only from KP EVO)
  • 2 programmable outputs (only from KP EVO)
  • Integrated timer function (needs an optional CR1216 battery)
Specifications
  • 115VAC
  • 100 Watts of absorbed power
  • Continuous duty
  • 24VDC Motor
  • Anti-Crushing device
  • Weight: 22 pounds
  • Opens from 70 degrees to 95 degrees
  • Pause time adjustable between 1 and 30 seconds
  • Adjustable speed
  • Automatic or manual opening
  • Pulling action for FRAME mounting and INSWING use only
FAAC 950 Electric Door Opener Includes
  • Transformer
  • FAAC 950 Input / Output board
  • FAAC 950 MPS Control Board
  • Positioning encoder
  • 2 shaft extending spacers: 30mm and 60mm
Product Literature

Payment & Security

Amazon American Express Apple Pay Bitcoin Bitcoin Cash DAI Diners Club Discover Dogecoin Elo Ethereum Facebook Pay Google Pay JCB Litecoin Mastercard PayPal Shop Pay USDC Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed