Skip to content
Estimate shipping
Cartell Wireless Hands-Free Exit Sensor With Sensitivity Adjustment Model CW-SYS
Add wireless vehicle detection to existing security/home automation systems, connecting to their cameras, sounders, etc. Also, seamlessly connect to any electric gate operator for free exit, whether residential or commercial.
Our wireless dual-purpose system can act as a driveway alarm and/or free exit system. Sensor is self-contained, housing an internal transmitter and antenna. Absolutely no trenching and installs in under an hour. Install sensor beside driveway, in the driveway, or on a post adjacent to the drive.
Includes
- Sensor puck
- Integrator
- Auger screws
- Batteries & clips
- Coaxial cable
- Terminal block screwdriver
Proactive Security:
Our system integrates with any security/home automation system, creating a safety zone in the driveway. Never be surprised by drive-up visitors or drive up to a dark driveway and house.
Automatic Gate Opener:
Our dual-purpose system opens any powered gate operator for a hands-free exit.
Superior Sensing:
Our system is powered by magnetometer technology with a sensitivity adjustment. It is only tripped by moving steel—not motion, heat, or pressure. No false alarms!
Fail-Safe Radio:
Redundant two-way radio at 915MHz guarantees signal reaches the receiver.
Features
Versatile:- Activates security/home automation systems and electric gate operators
- Universal voltage AC and DC
- Installs in under 1 hour (on average) without the need for trenching
- No external transmitter/antenna
- Install sensor above ground on immovable object; in the ground; or in driveway
- Easily pair multiple sensors with multiple Integrators
- Short driveways: install in middle of the driveway and turn down sensor sensitivity
- Wide driveways: install multiple units in driveway (12 ft. apart) or on both sides
- Reliable circuitry and filtering
- IP Rating: 68
- Strength rating: 9-ton force rate (8514 kgf)
- LoRA radio protocol at 915MHz
- Range determined by installation and obstructions to radio signal transmission
- Tested above ground: line of site, no obstructions, up to 2,500 feet (762 m)
- Tested flush with ground: line of site, no obstructions, up to 1,000 feet (305 m)
- 1-3 year battery life: CR123A (2)
- Sensor standby: 22 microamps (µA)
- Extra relay for low battery signal
Specifications
| Sensor “Puck” | Integrator | |
| Power Required: | 2 - CR123A batteries (6 V) | 8–24 VAC; 8–30 VDC |
| Standby Current: | 22 microamps (µA) | 25 milliamps (mA) |
| Alarm Current: | 130 milliamps (mA) | 40-80 milliamps (mA) |
| Relay Time: | - | 2 seconds |
| Relay Contacts: | - | SPDT, N.O. or N.C. (Form C) |
| Relay Contact Rating: | - | 2 amp/24 VDC (1 mA at 5 VDC min. load) |
| Estimated radio range: | In ground, line-of-sight, no obstructions: up to 1,000 ft. (305 meters)* | |
| Estimated Battery Life: | 1-3 years* | - |
| Enclosure Rating: | IP68 | - |
| Strength Rating: | 9.39 ton-force (8514 kgf) | - |
| Temperature Range: | -25°F - 140°F (-32°C - 60°C) | - |
| Dimensions: | 4.5 in diameter x 2.5 in H (11.43 cm x 6.35 cm) |
3.25 in L x 2 in H x 0.875 in D (8.25 cm x 5.08 cm x 2.22 cm) |
| Weight: | 2 lbs (.90 kg) | 1 lb (.45 kg) |
* Estimate only. Raido range & battery life depend on many variables. No guarantees.
Cartell CP-4 and CW-SYS Free Exit Systems Review & Programming Instructions
Product Literature
Find answers to our most frequently asked questions below. Got more questions? Reach out to our friendly customer service team, they will be more than happy to assist you.