SEA Lepus Box Fast 24V DC Hydraulic Slide Gate Motor | SEA-1110BOX24-CSA

SEASKU: SEA-1110BOX24-CSA

From Price:
Sale price$2,602.00

Estimate shipping

Chain sliding motor in an oil bath for heavy-duty applications for gates up to 1800 lbs. or 40 ft.

 

SEA Lepus Box Fast 24V DC BBU Chain Hydraulic Slide Gate Motor Model 1110BOX24-CSA with Stainless Steel Case, for gates up to 1800 lbs. or 40 ft. (Max Cycles 90 percent) with a receiver, two remotes, 20ft of chain, and back-up battery included

Chain sliding motor in an oil bath for heavy-duty applications for gates up to 1800 lbs. or 40 ft.

Included in Kit:

  • 1 Hydraulic Operator LEPUS BOX with USER 1 DG control board
  • 1 Type 40 Chain 20 Feet
  • 1 Receiver
  • 2 Remote controls 433 MHz
  • 1 Installation accessories Kit
  • 1 Installation instructions and general notice
  • 1 Warning signboard
  • Back-up Battery (2/12V 7Amp)
  • Reflective Photo Beam

Special Feature: SEA Gate Openers are all equipped with an on-board built-in Safety Buzzer that can be activated to alert you when the gate opener is moving or obstructed.

This Hydraulic Gate Operators (as well as all gate operators) MUST be installed by a professional and experienced installer. This model contains a pre-installed screw to be intact during transport so the oil does not leak. The screw must be removed prior to gate operation as failure to remove will cause damage to the gate operator and void warranty.

Specifications

SEA Lepus Box 24Vdc Chain Slide Gate Motor Specification

  • CSA Certified
  • UL Compliant
  • Equipped with digital control board USER 1 24V DG
  • Battery Back-up Ready
  • All parts are manufactured and tested by SEA
  • Electric motor and reduction gear are continuously immersed in oil bath allowing long last operation and intensive use
  • Gears housed in a single piece cast aluminum block.
  • Mechanical clutch in oil-bath as an anti-crush safety device.
  • Electronic clutch as an extra anti-crush safety device.
  • Reversing system in case of obstruction (ENCODER).
  • Easy and unique manual release with key.
  • Ball bearing wheels.
  • Stainless steel case with manual release.
  • Buzzer alarm
  • Duty cycles:* 90 %
  • Stainless steel case
  • On request model for up to 2000 lbs. (LEPUS BOX PLUS)
  • 24V version equipped with battery back up

**Duty Cycles depend on gate size and installation

Product Literature

SEA Lepus Box 24Vdc Chain Slide Gate Motor Manuals

You may also like

Recently viewed