Linear Wiegand Output MegaCode Receiver 318MHz | LIN-WOR

LinearSKU: LIN-WOR

Price:
Sale price$178.20

Estimate shipping

Linear Wiegand Output MegaCode Receiver 318MHz | LIN-WOR

Designed for use as an access control interface for Linear’s block-coded digital transmitters. The unit receives signals from transmitters, adds a facility code to the data, and sends the information to the Wiegand input of the access control panel via a 5-wire connection.

Several transmitter and receiver options can be set using the unit’s dipswitches. Three different Wiegand output formats (26, 30, & 31-bit) are supported. Three receiver options (lockout, hold, & button offset) can be set. Transmitter buttons on multi-button units can be selectively disabled. The facility code is set using 16 dip switches.

The receiver is housed in a weather-resistant enclosure and can be mounted indoors or outdoors. Gaskets and a weather-tight wiring strain relief seal the unit from the elements.

Features
  • Easy way to equip existing installations with radio transmitter access
  • Keyless entry offers user convenience, safety, and security for triggering gates, barrier arms, and doors
  • The ideal way to facilitate handicapped access
  • Multi-button transmitters can double as personal emergency devices for triggering security alarms
  • RF input/Wiegand output receiver supports 26, 30, and 31-bit data formats
  • Wide selection of MegaCode (over 1 million codes) format transmitters, with available block coding
  • Field adjustable read range – from 5 to 500 feet
  • Connects as easily as a card reader; transmitters are added like cards, with no software changes required
  • Facility and ID codes tailored to system requirements
  • A weather-resistant case for mounting outdoors
Compatibility
  • Linear AE1000Plus
  • Linear AE2000
  • Linear AM3Plus
  • Linear ACT-21B
  • Linear ACT-22B
  • Linear ACT-31B
  • Linear ACT-34
  • Linear MDT-1B
  • Linear MDT-2B
  • Linear MDT-4B
  • Linear MT-1B
  • Linear MT-2B
  • Linear ACT-31C
  • Linear ACT-34C
  • Linear ACT-31D
  • Linear ACT-34D
Electrical
  • Robust RFI and ESD protection for all inputs and outputs, including antenna input; protection to prevent output errors during brownouts
  • Power: Terminal block input “+” and “Gnd”; input voltage 5 Vdc regulated or unregulated between +6 to +24 Vdc with reverse polarity protection
  • Hold: Terminal block input “Hold”; follows standard Wiegand hold line conventions; hold line can be overridden via dip switch
  • Antenna: 9-1/2 in whip antenna with F-connector (supplied)
  • Data: Terminal block output “Data 0” and “Data 1” standard Wiegand electrical and protocol interface
  • LEDs: Red RF activity LED indicates RF activity at 318 MHz; red/green decode LED is green during Wiegand data transmissions and receiver hold timing window (if enabled) after any output transmission; otherwise it is off unless hold enable is selected, in which case LED will remain red until the hold is removed by the host system
  • Up to 300 feet with 24 AWG, 500 feet with 20 AWG; up to 1,000 feet, CAT-5
Mechanical
  • Receiver Facility Code: Four positions to select 1 of 16 possible MegaCode facility codes; if code 0 is selected, the receiver will validate any received facility code; any other selection requires the transmitters’ facility code to match the receiver facility code selection for validation
  • Output Facility Code: 16 positions to select one of 65,536 possible facility codes; a selected output format may not use all 16 bits
  • Output Format: 3 positions for selecting either 26, 30, or 31bit Wiegand output format
  • Button Disable: 5 positions, each corresponding to 1 of 5 possible MegaCode transmitter buttons – left or top left, right or top right, bottom left, bottom right, top
  • Button Offset: 1 position; if set to ON, the transmitter ID number is offset with a number based on which button is pressed
  • Receiver Lockout Disable: 1 position; if set to ON, the 1-second receiver lockout is not performed
  • Enclosure: Weather-resistant, anodized aluminum enclosure with removable end caps to provide wiring and programming access; end caps secured with screws
Technical Specifications
  • Frequency: 318 MHz
  • Bandwidth: 300 kHz minimum
  • Image Rejection: 40 dB
  • LO Reradiation: 200 µV/meter @3 meters (maximum)
  • Data Format: MegaCode
  • Sensitivity: -100 dB minimum
  • Desensitivity: 20 dB manual attenuation at the antenna input
  • Operating Temperature: -22° to +155° F (-30° to +70° C)
  • Dimensions: 4.25″ W x 6.25″ H x 2.5″ D
  • Accessories for use with WOR: EXA-1000, EXA-2000, MGT, MDKP
Product Literature

You may also like

Recently viewed