The D-TEK 110V / AC vehicle loop detector was designed for easy installation and operation. It provides maximum surge protection on all inputs and outputs of the detector.
D-TEK 110V Loop Detector
The D-TEK vehicle loop detector was designed for easy installation and operation. It provides maximum surge protection on all inputs and outputs of the detector.
The New DTEK Vehicle Loop Detector was designed with the following objectives in mind Allows for easy installation into small operator housings. All the controls must be accessible for easy installation and operation.
- Detector must operate reliably with marginal loops.
- Provide all the features and controls necessary for a variety of applications.
- Use four layer board for maximum durability and RF blocking.
- Provide maximum surge protection on all inputs and outputs of the detector.
Features:
- Loop Diagnostics
- Loop Isolation Transformer
- Loop Conditioner
- Aluminum RF Shield Housing
- Surge Protection
- Loop Frequency Counter
- 10 Gold Plated Sensitivity Controls
- 8 Gold Plated Function Controls
- 6 Gold Plated Controls for Frequency, Reset & Frequency Counter
- Two High Intensity LED Indicators
- 2 relays relay 2 is pulse or presence
Technical Specifications: | |
Power: | The detector is available in the following voltages, 12 V AC/DC, 24V AC, 24V DC, 110V AC, 220V AC. Maximum current draw 100mA |
Low Power: | Detector is available with maximum current draw of 60mA |
Temperature: | -40F to + 180F |
Environmental Protection: | Circuit board is conformally coated |
Enclosure: |
Extruded anodized aluminum, |
Output Relays: | 5A/125 V AC standard version, 1A/125 V AC low current version |
Connector: | 86CP11 compatible with 11pin Octal DIN rail mountable socket or wire harness |
Surge Protection: | The detector is protected with neon discharge lamps, zenner diodes and surge arrestors |
Loop Input: | Transformer isolated |
Grounded Loop: | The loop isolation transformer allows operation with poor quality loops |
Loop Inductance Range: | 20 to 2000 microhenries with Q factor of 5 or higher |
Tuning: | Detector automatically tracks and compensates for environmental changes |
Tracking: | Detector automatically tracks and compensates for environmental changes |
Power Indicator: | Green LED solid light indicates power |
Loop Failure Indicator: | Green LED blinks indicating loop problem |
Loop Failure Memory: | Green LED blinks with fast consecutive blinks indicates past loop problem that healed |
Detect Indicator: | Red LED solid light indicates detection |
Extend Indicator: | Red LED blinks after a car left the loop indicates time extend feature |
Sensitivity: | Is set by 10 position rotary switch |
Frequency: | Is set by three position toggle switch |
Infinite Presence Mode: | DIP switch selectable presence |
Limited 4 Minutes: | DIP switch selectable presence |
Presence Time: | DIP switch selectable |
Second Presence Relay: | DIP switch selectable |
Pulse On Exit / Entry: | DIP switch selectable |
Fail Sale / Secure: | DIP switch selectable |
Filter: | DIP switch selectable 2 seconds |
Extended Detection: | DIP switch selectable 3, 6 and 9 seconds |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.