Ritron Q1 Basic Analog Callbox MURS VHF License-Free

RitronSKU: RIT-RQX-111M

Model: Q1 Basic Analog Callbox MURS VHF License-Free (Hi-Viz GREEN Color)
Sale price$554.29

Ritron Q1 Basic Analog Callbox MURS VHF License-Free

Put wireless communication right where you need it! Position the compact and durable Q Series 2-way radio callbox virtually anywhere to maximize manpower efficiency, improve safety and service response times. Deploys easily - no wires, no trenching, no construction required. Can be used stand-alone using alkaline batteries or can be powered using an external AC adapter.
The Q Series callbox provides crisp, clear, long-range voice communication and allows staff and visitors to communicate with your analog radio-equipped personnel from points near and far, be it the plant floor, a maintenance garage, the gated entrance, a delivery dock, or the 9th Tee. Accomplish more with your 2-way radio system!

  • Battery Powered or External Power Capable
  • Rugged, Polycarbonate Gasket-Sealed Enclosure
  • Vandal-Resistant, Built-In Antenna
  • Vandal-Resistant, 1,000,000 Cycle, Aluminum PTT Button
  • D-Cell (3) Battery Tray (batteries not included)
  • Integrated Speaker & Microphone
  • Field-Programmable and PC Programmable
  • Metal Wall-Mount Brackets (2), for flat surface, 4 Screws
  • T-25 Torx Bit (hollow point type)
  • Wireless, 2-Way, Push-To-Talk, Narrowband Analog Technology
  • No trenching or construction costs to install
  • Available in VHF MURS License-Free frequency band, and license-required VHF 150-165MHz and UHF, 450-470MHz frequency band
  • Business band frequencies, long-range performance - up to1 mile* *line-of-sight.
  • Works with any VHF or UHF analog business band 2-way radio
  • Durable, gasket-sealed, high-impact molded, polycarbonate enclosure
  • Tamper and Vandal-Resistant, Internal Antenna, Long-Life, Machined Aluminum PTT Button
  • Battery* Powered For Stand-Alone Operation or External Power for Always-On Operation. *For optimal performance in battery-only applications, Auto Turn-Off should be enabled.
  • Adjustable Volume, High-Audio Output, Provides Easy To Hear Audio In High Noise Areas
  • User Adjustable field-programmable settings.
  • PC programmable
  • Built-in relay control (Series 7 model only) allows long-range, remote control of gates or doors or use with an optional flashing strobe light.
  • Standard Flange Mount Hole Pattern Easy Installation. Optional Mounting Brackets Available
  • Available In Different Enclosure Colors:  High-Viz Green and Black
  • Call Ritron regarding custom colors for volume applications
  • Designed and Made in the USA
  • 1 Year Factory Warranty
Technical Specifications
  • Description –Analog, Conventional: VHF MURS
  • Tx Pwr Using 3 D-Cells: 700mW
  • TX Pwr Using Ext 12VDC Pwr: 2 Watts
  • Includes Built-In Relay, Stored-Voice Msg, Sensor Switch Inputs: No
  • RF Channels: 1 Channel Analog (12.5KHz)
  • Signaling: CTCSS & DCS Encode/Decode, DTMF Encode/Decode, SelCal Encode/Decode, 2-Tone Decode Only
  • Dimensions: 7” H x 5” W x 3” D
  • Weight: 2.75 lbs
  • Enclosure Material: Gasket Sealed, High-Impact Polycarbonate
  • Colors: Black or High-Viz Green
  • Environmental: Splash resistant, shock, and vibration per Ritron test
  • Operating Temperature: -20°C to +55°C (-4°F to 131°F) Battery rating. At 0°C the capacity is < 50% rated) Talk range will decrease at low temperatures when operating on alkaline batteries.
  • Programming: Field programming capability of limited parameters. Full programming capability using internal USB Connector used for full PC Programming.
  • Built-in Remote Control Relay (7 Series): Can be used to remotely control gates, doors, or strobe lights. The (7 Series) relay switch is controlled when the callbox receives the pre-programmed selective signaling command code.
  • SPDT, 3A, 125VAC/30VDC – Normally Open or Normally Closed (NO Default). Modes of Operation: Momentary or Toggle, On/Off.
  • Aux Sensor Monitoring Input: Optional sensors used to detect motion, gate movement, vandal/tamper or vehicle presence can be connected to the callbox using the sensor input.
  • Sensor input responds to an Open or Closed switch. Callbox will send either an alarm tone or a recordable voice message when the optional switch/sensor detects a change.
  • Can also be programmed to automatically turn the callbox ON and transmits recordable voice message or alarm tone to radios monitoring callbox activity.
  • Adjustable Speaker Volume: Adjustable 20% to 100%
  • Automatic Turn-Off Feature: Conserves batteries. Selectable turn-off times will automatically turn the callbox off after a set period of inactivity on the radio channel. Auto Turn-OFF feature must be enabled when using battery-only power.
  • Listen-In Feature: Callbox can be selectively paged to allow remote monitoring of audio in the vicinity of the callbox.
  • Busy Channel TX Inhibit: Prevents Callbox from transmitting if someone else is using the radio channel.
  • Recordable Voice Messages: Greeting Message/Send Call Alert Message/Sensor ON/Sensor OFF/ Low Battery Message/Send Power Fail Message/Auto “Re-Send” - Selectable 0-5 times.
  • Battery Life: 3 D-Cell Alkaline Batteries: Number of Transmissions: Approximately 6,000 based on a duty cycle of 3 Seconds Receive, 3 Seconds Transmit, 10 Seconds Standby.
Model Numbering Key
  • M: denotes MURS Frequencies only (Note: For Part 90 licensed VHF frequencies you must order the non-M VHF model)
  • 7: denotes advanced feature model i.e. built-in relay control, recordable voice messages, and 1 dry-contact switch input.
  • -BLK: denotes housing color is black. (Default color is Hi-Viz Green)
Product Video

Product Literature

Payment & Security

Amazon American Express Apple Pay Bitcoin Bitcoin Cash DAI Diners Club Discover Dogecoin Elo Ethereum Google Pay JCB Litecoin Mastercard PayPal Shop Pay USDC Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed